87 found, showing page 5 of 6
O-RING (EPDM), 3/8 INCH, 10-EACH
10-pack 3/8 inch (9.53 mm) Buna(R) style O-rings for pressure washer quick coupler sockets. Replacement O-rings for Forney 75128 and 75129, Quick Coupler Sockets.
SPECIFICATIONS
Fitting: O-rings
Style: Buna(R)
Size: 3/8 inch (9.53 mm)
Package Quantity: 10
Maximum Temperature: 210? F (98.89? C)
View Details
$12.99
O-Ring, 15-Piece Replacement Set
15-piece Viton(R) style, 1/4 inch (6.35 mm) Buna(R) style and 3/8 inch (9.53 mm) Buna(R) style O-rings. Five of each style/size. Replacement O-rings for pressure washer screw couplers and quick coupler sockets.
View Details
$10.99
Detergent Injector with Hose
Pressure washer detergent injector/strainer with 48 inch (1.22 m) hose and 3/8 inch (9.53 mm) Male National Pipe Thread (MNPT) x 3/8 inch (9.53 mm) Female National Pipe Thread (FNPT) brass garden hose connector with adjustable flow chemical injector. The chemical injector/strainer has a built-in stainless steel check valve. Attach the injector/strainer to the 48 inch (1.22 m) hose and connect the hose to the brass garden hose connector. Then connect the garden hoses to the brass connector. Once hooked up, place the injector/strainer in the detergent container. The injector/strainer has an internal brass weight that keeps the strainer at the bottom of the container. Turn on the water. The detergent enters through the strainer preventing debris from entering the pump. The built-in stainless steel and Viton(R) style check valve prevent water from flowing back into the soap solution. The detergent inflow can then be adjusted using the adjustable flow knob on the top of the brass connector. COLD WATER ONLY. Forney 75172 is a replacement Detergent Injector Strainer.
SPECIFICATIONS
Fitting: Detergent injector/strainer with hose
Material: Brass and plastic housing with stainless steel check valve
Garden Hose Inlet: 3/4 inch (19.05 mm) Female National Pipe Thread (FNPT) Garden Hose Outlet: 3/4 inch (19.05 mm) Male National Pipe Thread (MNPT) Hose Length: 48 inch (1.22 m)
Gallons Per Minute (GPM) Range: 1.5 - 4.0 GPM
Maximum Temperature: 160? F (71.1? C)
Maximum PSI: 140 PSI
View Details
$69.99
Replacement 1/2 Inch O-rings, 10-Pack
10-pack 1/2 inch (12.7 mm) O-rings for pressure washer quick connect and screw couplers.
SPECIFICATIONS
Fitting: O-rings
Size: 1/2 inch (12.7 mm)
Diameter: 11/16 inch (17.46 mm)
Package Quantity: 10
Maximum Temperature: COLD WATER ONLY
View Details
$13.99
5-in-1 Multi-Adjustable Pressure Washer Nozzle
5-in-1 multi-adjustable pressure washer spray nozzle. The nozzle easily connects to the wand with the 1/4 inch (6.35 mm) Quick Connect (QC) fitting. Once connected, the user simply turns the nozzle to any one of five spray patterns (0?, 15?, 25?, 40? or 65?) to get the desired cleaning result. This is a quick and easy alternative to using the individual QC spray nozzles. It is ideal for jobs that require quick transitions from in blasting in to applying soap, and anything in-between.
SPECIFICATIONS
Fitting: 5-in-1 adjustable spray nozzle
Material: Brass and plated steel
End #1: 1/4 inch (6.35 mm) Male Quick Connect (QC) Plug
End #2: 5 option spray nozzles
Orifice: 4.0 mm
Nozzle #1: 0? Blasting (equivalent to red color-coded individual spray nozzle)
Nozzle #2: 15? Chiseling (equivalent to yellow color-coded individual spray nozzle)
Nozzle #3: 25? Flushing (equivalent to green color-coded individual spray nozzle)
Nozzle #4: 40? Washing (equivalent to white color-coded individual spray nozzle)
Nozzle #5: 65? Soap (equivalent to black color-coded individual spray nozzle)
Maximum Temperature: 140? F (60? C)
Maximum Working Pressure: 4,000 PSI
View Details
$16.49
High Flow Style Coupler, 1/4 in x 1/4 in MNPT
High flow nickel plated steel air coupler with lightweight, high-strength anodized aluminum sleeve. Push-to-connect and 1/4 in (6.35 mm) Male National Pipe Thread (MNPT) ends make this fitting easy to attach to your air tools. The high flow fitting has a larger internal diameter compared to standard interchanges which provides up to nearly twice the air flow. Fitting has a 300 Pounds per Square Inch (PSI) maximum working pressure, an air flow of 74 Standard Cubic Feet per Minute (SCFM), and temperature range of -40? F (-40? C) to 230? F (110? C). The perfect air fitting for high volume, low pressure applications.
View Details
$12.49
High Flow Style Plug, 1/4 in x 1/4 in MNPT
High flow nickel plated steel air plug. Push-to-connect and 1/4 in (6.35 mm) Male National Pipe Thread (MNPT) ends make this fitting easy to attach to your air tools. The high flow fitting has a larger internal diameter compared to standard interchanges which provides up to nearly twice the air flow. Fitting has a 300 Pounds per Square Inch (PSI) maximum working pressure, an air flow of 74 Standard Cubic Feet per Minute (SCFM), and temperature range of -40? F (-40? C) to 230? F (110? C). The perfect air fitting for high volume, low pressure applications.
View Details
$2.89
High Flow Style Coupler, 1/4 in x 1/4 in FNPT
High flow nickel plated steel air coupler with lightweight, high-strength anodized aluminum sleeve. Push-to-connect and 1/4 in (6.35 mm) Female National Pipe Thread (FNPT) ends make this fitting easy to attach to your air tools. The high flow fitting has a larger internal diameter compared to standard interchanges which provides up to nearly twice the air flow. Fitting has a 300 Pounds per Square Inch (PSI) maximum working pressure, an air flow of 74 Standard Cubic Feet per Minute (SCFM), and temperature range of -40? F (-40? C) to 230? F (110? C). The perfect air fitting for high volume, low pressure applications.
View Details
$12.49
High Flow Style Plug, 1/4 in x 1/4 in FNPT
High flow nickel plated steel air plug. Push-to-connect and 1/4 in (6.35 mm) Female National Pipe Thread (FNPT) ends make this fitting easy to attach to your air tools. The high flow fitting has a larger internal diameter compared to standard interchanges which provides up to nearly twice the air flow. Fitting has a 300 Pounds per Square Inch (PSI) maximum working pressure, an air flow of 74 Standard Cubic Feet per Minute (SCFM), and temperature range of -40? F (-40? C) to 230? F (110? C). The perfect air fitting for high volume, low pressure applications.
View Details
$2.89
Universal Coupler, 1/4 in x 1/4 in FNPT
1/4 in (6.35mm) coupler. Brass construction. Max working pressure: 300 PSI.
View Details
$14.99
Industrial/Milton Style Coupler/Plug Set, 1/4 in
1/4" Industrial/Milton(R) compatible plug and coupler set. Forney Industries ITEM# 75234 plug with 1/4" male national pipe thread (NPT). Forney Industries ITEM# 75240 coupler with 1/4" female NPT. Intended for use on compressed air lines only.
View Details
$12.99
Industrial/Milton Style Plug, 3/8 in x 3/8 in MNPT
3/8 in (6.35mm) plug. Steel construction. Max working pressure: 300 PSI.
View Details
$5.79
Tru-Flate Style Coupler, 1/4 in x 1/4 in MNPT
1/4" (6.35 mm) Tru-Flate(R) compatible coupler with 1/4" Male National Pipe Thread (MNPT).
View Details
$10.79
Tru-Flate Style Coupler, 1/4 in x 1/4 in FNPT
1/4" (6.35 mm) Tru-Flate(R) compatible coupler with 1/4" Female National Pipe Thread (NPT).
View Details
$11.49
Industrial/Milton Style Coupler, 1/4 in x 1/4 in MNPT
1/4" (6.35 mm) Industrial/Milton(R) compatible coupler with 1/4" Male National Pipe Thread (MNPT).
View Details
$9.99
